Trilithic
QAM Podcast

860 DSPh

860 DSPh 860 DSPh

Remote Headend Analyzer

The answer to managing the performance of remote Headends, the 860 DSPh cable analyzer continually monitors forward channel performance, generates SNMP traps if a test is out of limits, provides live view of problems via Internet. The 860 DSPh is simple to install and use and is very cost -effective. Unlike other digital cable analyzers, the 860 DSPh analyzer includes:

  • Automatically scans levels, other key parameters

    Refreshes all carrier amplitude measurements every 30 seconds (single port).

  • Compares to user-set limits, issues SNMP Traps

    Allows multiple trap definitions for multiple operators. Also Traps on sudden changes in parameters.

  • Remote control for immediate measurements

    Browser-accessible for data uploading and troubleshooting.

  • Monitor one, four or 16 input ports

    Internal switch allows monitoring of up to four ports (with Option). With 1U Adaptor, monitors up to 16 ports (with Option).

The new Trilithic 860 DSPh is the ideal instrument for managing signal quality in remote headends or other facilities where access is restricted or local technical personnel are not available. Based on the powerful, cost-effective 860 DSPi Cable Analyzer, the new 860 DSPh remote headend analyzer provides continuous visibility of signal quality, at a price that makes general deployment practical. Using a network of 860 DSPhs, operated through Viewer II monitoring Application Software, the operator can monitor signal quality at many sites throughout his system from a single location and be alerted to problems quickly if they occur. Depending on options, each 860 DSPh remote headend analyzer can monitor the performance of up to sixteen independent inputs.

The DSPh remote headend analyzer is usually set to operate automatically, monitoring key forward and reverse parameters, logging and analyzing measurement data against user-programmable limits. If a parameter falls outside of limits, the 860 DSPh can dispatch a range of SNMP traps to multiple destinations, where Viewer II Monitoring Application Software alerts the operator to the problem. The 860 DSPh can also detect rapid changes in measurement results for a given channel and generate a warning trap.

The operator may then take control of the Trilithic DSPh remote headend analyzer directly, and use its powerful analytical tools to determine the cause of the problem.

860 DSPh

Measurements

  • Channel Level
  • Depth of modulation
  • FM Deviation
  • Hum
  • C/N
  • MER

Test Management

  • All channel levels are given priority and measured every thirty seconds
  • Min, max, avg, and current saved for all measurements
  • All other tests (C/N, Depth of Modulation, FM Deviation, HUM, and MER) are measured between channel scans
  • All data is compared to limit(s) for a Pass/Fail decision, with results stored for 24 hours. (10 minutes in hardware)
860 DSPh

SNMP Traps

  • Sends traps on a per-channel basis
  • Escalation/de-escalation of problem prompts new traps
  • Timed resend to catch alarms lost due to network conditions
  • Traps contain all information regarding affected channel, location, and fault
  • 860 maintains MIB of last readings for each test and current state of each channel, available for retrieval by Viewer II

Uses Trilithic Viewer II Trap Management and Viewing Software

  • Provides Trap information in a list display
  • Presents trap occurrences in tree views of deployed 860 DSPhs
  • Compares Trap data to limits
  • Saves Trap data in database
  • Presents Live views of scans or measurement values
  • Displays recent history scans in tabular lists

Remote Access (Web Server):

  • Current alarms available for all channels
  • Current channel information available for all measurements
  • Remote access does not impact scanning speed or SNMP speed

860DSPh Datasheet

Close